How do i instal upgrade spring into my airsoft gun ?

how do i instal upgrade spring into my airsoft gun ?



i bought a 350 fps spring for my airsoft gun



but i dont know how to change the old spring that the gun has in itHow do i instal upgrade spring into my airsoft gun ?
The people before me have already explained for low cost spring guns (which usually don't have the internal strength to survive upgrades). If you are upgrading a AEG you should ask you're self a few questions before continuing



1)are you mechanically inclined, because you may need to enjoy time spent troubleshooting you're problems (shimming is a really B****)

2)Do you have metal bushings? If you have a TM then you wouldn't and need to get metal bushings (make sure you have the right size)

3) are you willing to cut down the lifespan of that gearbox (which are repairable) to gain the 50 FPS?



If you still plan to upgrade then check out these sites (Its where I got most of my information and would basically plagiarize if i posted it)



http://arniesairsoft.co.uk/articles/skyf



http://www.arniesairsoft.co.uk/?filnavn=



and

http://www.airsoftretreat.com/reviews/sh





I hope I was of help (pretty much everything was based on TM, ICS, and CA guns though)How do i instal upgrade spring into my airsoft gun ?
No simple answer. You'll have to grab a screwdriver and start dismantling your weapon. You can't just put the weapon and the spring into a bag and shake it real well.



Start taking parts off one by one and laying them in a semi circle around you on the table. Remember hwo you took each off. When you get to the main spring, you'll know you've arrived. Reassemble in reverse order.



If you're not mechanically inclined, you'll probably want to get someone who is to do the work for you.



Sorry I couldn't be of more help. There's not enough info in your question to be more exact.
it's not too hard of a thing to do. i assume you've got your gun apart? if not just take out all of the screws on the outside to take the case apart then remove the spring (should be easy, their usually pretty exposed) and put the new one on. keep track of all the pieces parts that you take out and you *may* need to trim down the spring so it's the right size. then just slip the spring on and reassemble the gun





any advice out side of that would be to go look around in airsoft forums or on googel for instructions on how to dissassemble and upgrade you'r particular gun.

common boys names

black circles under my eyes