How hard is it to convert from rear block lift to all spring ?

i have a 85 chevy k10 with a 6'; lift. the rear has blocks. i would like to know how hard is it to change that to all springs and delete the blocks. and where could i find the springs to do so?

thanksHow hard is it to convert from rear block lift to all spring ?
It's not hard at all, not much more work than installing blocks to begin with. Any 4wd performance shop in your city should be able to help. Some websites sell lift springs for you vehicle. You might also find some springs from other vehicles in a junk yard that will give you the lift you desire. do some research on it.How hard is it to convert from rear block lift to all spring ?
just take off the 4 ubolts, then the spring bolts at each end.. chances are youll probably have to cut them off. then reinstall. your going to need new ubolts since they have to be a lot shorter getting rid of the block. theres a bunch of companys that make 6 inch lift springs, skyjacker, trail master, rough country, etc.